Teflon Conveyor Belt

During the use of Teflon mesh belt, often encounter slipping, then how to deal with such a problem? The tension of Teflon mesh belt on both sides is too small, the slipping caused by the tension of the mesh belt from the drum is not enough, this situation generally occurs in the start, the solution is to adjust the tension device, increase the friction of mesh belt and the drive shaft. Passive bearing damage does not turn or up and down the roller bearing damage does not turn, causing damage […]

Attentions Teflon mesh conveyor belt is made of glass fiber fabric coated with PTFE resin, and according to the warp and weft are divided into single and double weft. With good performance of high temperature resistance, weather resistance, anti-aging, non-toxic, high strength, fire retardant, good permeability, acid and alkali resistant, widely used in all walks of life. In order to extend its service life, What matters in the use of maintenance procedures need to pay attention to? In order to extend the service life of the belt, to ensure that […]

Teflon conveyor belt in the course of the use of easily has some problems, how to improve its service life? Rope-type conveyor belt transverse strength is insufficient, At startup, belt wheel will cause the local force of the conveyor belt is too large, causing the conveyor belt to tear. To avoid this problem, to extend the service life of the conveyor belt, can be any of the concave transition of the driving wheel at the wheel umbrella to change the claw belt roller. To extend the life of the Teflon […]

Teflon conveyor belt although has the properties of wear-resistant high temperature, but because of the load capacity and running fast, after a long run back and forth, the wear resistance of the conveyor belt will decline, Inevitably there will be wear and tear, glass fiber leakage problems encountered in these problems should be promptly repaired, otherwise the conveyor belt will be scrapped, affecting production schedule. So how to fix it? Teflon conveyor belt sent wear common repair methods: Rubber patch up method, local rubber vulcanization method and rubber repair rubber […]

Teflon conveyor belt is made of glass fiber cloth and then coated with a special process Teflon emulsion made of a kind of high temperature conveyor belt. Will inevitably damage the conveyor belt if storage and use of improper maintenance. Then what matters to increase its service life should be paid attention to when storage and use and maintenance process? When unloading Teflon conveyor belt to prevent the destruction of band-edge, preferably with a crane, and rigging with a rigging beam lifting, not barbaric handling. To avoid the sun and […]