Teflon Conveyor Belt

Teflon conveyor belt deviation is often seen in the process of using, it is easy to cause the production process can not be normal produced, Here are some common reasons and solutions of conveyor belt deviation. 1.Tension adjustment Conveyor belt tension adjustment is a very important part of the dryer deviation adjustment. The two change drums at the top of the heavy hammer except should be perpendicular to the direction of the length of the conveyor belt, it also should be perpendicular to the vertical line of gravity, that is […]

Teflon conveyor belt maintenance should pay attention to the nine points: Teflon conveyor belt is best used lap high-temperature heat joint, the tensile strength of this kind of joint is the best When the Teflon conveyor belt to transport materials, to avoid surface coverage by materials, resulting in rotation is not working, to prevent the leakage of materials in between the roller and tape. If you find that Teflon conveyor belt local damage, the belt should be repaired in time to avoid the gap expansion. Conveyor belt selection should be […]

The main damages of Teflon mesh conveyor belt are mesh wear, covered edge wear, joint damage, mesh belt elongation and Teflon coating off, the most serious is the mesh surface damage, joint damage and covered edge wear. Mesh surface wear mainly is the filament breaks during use, as mesh banding caused by tearing the mouth is getting bigger and bigger, we can not can not use sharp objects with the mesh surface friction in the production process. Covered edge wear mainly is caused by deviation, once the Teflon mesh conveyor […]

Teflon conveyor belt is now more and more widely used in food baking industry, it can be used as conveyor mesh belt drying food, such as drying chrysanthemum, dehydrated vegetables, soybeans, peanuts, wheat and so on. Can also be used as a food grill mesh baking mat to baking moon cake, biscuits, bread, pie and so on. The most common application is as drying conveyor mesh belt. Why Teflon mesh belt can be applied to food baking? Why Teflon mesh belt can improve the production efficiency of food baking enterprises, […]

During the use of Teflon mesh belt, often encounter slipping, then how to deal with such a problem? The tension of Teflon mesh belt on both sides is too small, the slipping caused by the tension of the mesh belt from the drum is not enough, this situation generally occurs in the start, the solution is to adjust the tension device, increase the friction of mesh belt and the drive shaft. Passive bearing damage does not turn or up and down the roller bearing damage does not turn, causing damage […]